HomeFabricationASME Pressure VesselsSeparators

ASME Separator Fabrication Should be Certified, Effective, and Efficient

You have a need for ASME separator fabrication. What’s most important to you? If we had to guess, it would be design and construction that increases safety, controls operation and maintenance costs, minimizes emissions, maximizes capacity, and reduces downtime. That’s exactly what Boardman delivers to our customers, and we’re ready to discuss how our capabilities, combined with a process tailored to you, can meet or exceed all your expectations.

Quality Cannot be Compromised—and the Process Shouldn’t Be Either

Whenever there’s an ASME vessel required, you know that it must be manufactured with the strictest standards at the forefront of all phases. When you’re separating fluids, protecting steam systems from excessive pressure and interactions, and guarding personnel against accidents due to steam back pressure or interactions, shortcuts just won’t do.

Boardman has been fabricating since 1910, and we understand the importance of quality construction. But when you work with us, you’ll quickly realize there’s more at stake here.

We also deliver on a promise of stewardship, meaning that you can be as involved as you’d like to be, and we’ll guide you as much as you need us to. We can take instructions and run with them or take you with us on every step of the fabrication journey. That’s what makes working with us different, and why our customers keep coming back.

Get in touch with us to discuss how we can help you.

ASME Separators for Many Applications

Our ASME separator fabrication projects land in many different industries, for use in a variety of applications. Here are some examples of separators we’ve manufactured at Boardman:

  • Low-Pressure Separators
  • High-Pressure Separators
  • Hot Separators
  • Oil Separators
  • Flare Separators
  • Gas Separators
  • Propane Separators
  • Inlet Separators
  • Heavies Separators
  • Refrigerant Separators
  • Cold Separators
  • Multi-Phase Separators
  • Disulfide Separators
  • Steam Separators

What application do you have for an ASME separator? We’re ready to hear about your project and talk about how we can help.

Our ASME Separator Fabrication Capabilities

When you think about a separator, you might think of gases and liquids being forced to move past each other in a high-pressure environment. We invite you to think about our fabrication capabilities in much the same way. We’re no strangers to tight deadlines and stringent requirements—in fact, we’ve been thriving in that type of environment since 1910.

Our capabilities have been developed to meet your most demanding needs, and our team is prepared to take on even the greatest fabrication challenges to make your job easier.

The Industries

Separators are necessary components in all types of processes, including those essential to the following industries:

The Dimensions

Our facility in Oklahoma City, OK, measures 140,000 square feet, with the capability to manufacture vessels with dimensions up to:

  • 16’ Inside Diameter
  • 200’ in Length
  • 6” Thick
  • 350 tons

The Metals

Your separator must be constructed from a particular material, and we have the following available:

The Standards

You know that ASME vessels must pass inspections and meet strict requirements. We live and breathe ASME regulations as well, so you can rest assured that your separator will meet all the following requirements:

  • ASME Section VIII Div. I
  • ASME Section VIII Div. II
  • National Board “U” Stamp
  • National Board “R” Stamp
  • AWS
  • API
  • AISC

Need engineering and design services? Do you want to know that you can count on the quality that comes out of our facility?

Since 1910, we’ve been delivering the services our customers need most—ones they can depend on, without question. You are invited to join those who rely on us. It all starts with a conversation about your upcoming separator job. Let’s talk.

Boardman Offers More than ASME Separator Fabrication

Sure, you can get the ASME separator that meets your specific needs from Boardman. And we’re happy to provide that. But our ASME pressure vessel capabilities certainly don’t end there. You’ll also spot any number of these items on our facility floor at any given time:

And let’s not forget about our other fabrication services, including custom fabrication, heavy plate fabrication, and trayed towers and columns.

How can Boardman’s services help to ensure the success of your ASME separator project? It all starts with a phone call.

Definitely a great team effort between HFS and Boardman to get this knocked out quickly with no mistakes.  Appreciate you and your teams help getting this across the finish line!

Reliability & Inspection

HF Sinclair

The BFS team is very responsive, conduct quality work, and produce detailed reports.  They have excellent level of support, responsiveness and quality work!

Construction Manager

Vestas

“I am glad you guys do the newsletters. Educate AND do the work. Most don’t do this. It is similar to what Dave Ramsay says about looking for a Financial Advisor… look for one with a heart of a teacher.”

Equipment Engineer

Fluor

“I would like to go out of my way to say this is the quickest I have seen a vessel come together. Your ability to manage this on such short notice does not go unnoticed and definitely will earn you some more business. Your professional approach and ability to keep this moving was amazing! I was hoping to see this thing through to the end and see about getting some Guiness world record trophy on our walls.”

Mechanical Engineer

Chevron

“Just wanted to send a quick thank you for sending these newsletters. I really enjoy them and share them with others at the office.”

Project Management

Kestrel Engineering

“Thank you for all your help on this order. Please let your team know that everything Boardman has done for this order has been top notch!”

Mechanical Engineer

Worley

“It was a real pleasure working with you and your team. I wish all vendors would have the same high quality team!”

Expeditor

Worley

“Your engineering team has gone above and beyond for our current projects. We have thrown quite a few changes at them and they have dug into code details that are not normally required to satisfy the requests of some of our SME folks. They are always available, even when they’re off or on weekends to help answer any urgent questions. I tried to find something we can do to help recognize the extra efforts, but could not come up with anything. Thank you for the efforts and willingness to work with us so closely on these urgent jobs.”

Mechanical Engineer

Chevron

“It was great pleasure and it was sure a huge effort pulled by Boardman organization. Promoting such events are very helpful to the engineering community in general but very few places realize the same. Boardman being exceptional and very hospitable place to be for this event. I want to say Thank You Boardman!”

Mechanical Engineer

Chevron

“The class was an excellent use of time and has increased my industry knowledge. Good mix of both end user and design engineer attendance which drove discussions into new directions. I will highly recommend to my firm for attendance next year.”

Mechanical Engineer

S&B Engineering

“Thank you and everyone at Boardman for an excellent 2 days of training and exceptional hospitality. While it gave me the opportunity to get out of the office for 2 days, it was also a great training/refreshing opportunity for me and on top of it, I got to visit your facility, which I think is quite impressive. Hope to have some more work in your shop soon. There are several folks here who were amazed when I told them that you guys had welding stations set up and each of us got to weld and try out as many as 4 welding processes. Please keep me posted on the next training session.”

Vessel Engineer

Burns & McDonnell

“I just wanted to say thank you very much to you and your team for all of the work that you put in to make this seminar possible. I was very impressed with the quality of the seminar. It is the best technical seminars I have been to. The classroom intermixed with shop time made the experience a one of a kind. The instructor is a wealth of knowledge. I was also very impressed with the care and concern that you had for those attending. You guys have superb customer service. I really appreciate the opportunity and it means a lot.”

Mechanical Engineer

MKEC Engineering

“Thank you guys very much for putting together the Pressure Vessel Fabrication presentation. I’ve heard great things from about the vessels currently in your shop. We look forward to building a long lasting relationship.”

Corrosion/Materials Engineer

Phillips 66

“The Boardman team’s expertise, experience and processes made our project easy. The communication between their team and mine ensured our project ran smoothly. I knew I could count on the work they sent. I look forward to working with a company that communicates well and takes pride in their work.”

Mechanical Engineer

Worley

“I just wanted to share some photos of the Deisobutonizer being lifted into place yesterday. None of this would have been possible without your efforts in both the manufacturing and transport of the tower. This is the largest structure on the project and you all deserve a lot of credit for this milestone. It was not only a pleasure to work with you all on this fabrication and hauling to site of the monstrosity but it was a privilege to have such a team behind us to make this happen with no incident and what on the surface seemed child’s play. You all should be very proud of yourselves and your collective teams and firms, without you none of this was even conceivable.”

Materials & Logistics

Cenovus Superior Refinery

“I worked with Boardman on a project involving multiple vessels. The team’s impressive knowledge of ASME Section VIII Div 1 was critical to the success of the project. I enjoyed seeing the vessels in person during an engineering design course at the Boardman facility. The team always kept me in the loop and ensured quality work from fabrication through shipment.”

Mechanical Engineer

Black & Veatch

“Boardman was great to work with from the initial bidding phase through procurement. It is clear that they value relationships and are very professional. I have worked with Boardman in the past, and they continue to meet the requirements of our projects and owners. I value our relationship and hope to continue to work with them in the future.”

Sr. Procurement Manager

Black & Veatch

“Thank you for the high level of communication on this project and the effort put into making things work. So far this project has gone smoothly and our efforts have not gone unnoticed. Specifically the time invested in making sure the anchor bolt pattern matched their existing foundation. Not sure if it is my place to say but you are highly regarded at this refinery.”

Mechanical Engineer

Merrick Engineering

“I am continually impressed with the level of quality and professionalism on this project from the beginning.”

Inspector

HF Sinclair

“Boardman was very professional throughout the engineering and design of this vessel. They did a really good job on fabrication.”

Project Manager

Chevron Phillips Chemical